Water Damage Restoration · Sydney
Water Damage Repair
Burst pipes, roof and storm leaks, overflow and rising damp — dried out, repaired and made good by a licensed Sydney builder. Plaster, ceilings, flooring and paint all put back properly, not patched over.
Licensed NSW builder 357576C · Fully insured · 10-year workmanship guarantee
Get the damage sorted once — not just hidden
Water that sits in a ceiling, wall cavity or subfloor keeps causing harm long after the leak looks dry — stained plaster, blistered paint, swollen skirtings and, within days, mould. We treat the whole chain: find and stop the source, dry the structure properly with moisture readings, then rebuild and refinish so the room looks the way it did before.
We work on single-room ceiling leaks right through to multi-room saturation and insurance restorations across Sydney. You get one crew handling detection, drying and the make-good repairs, so nothing falls through the gap between a plumber, a plasterer and a painter.
What water damage repair costs in Sydney
Every job is quoted after we read the actual moisture and see how far it has travelled. As a guide, most Sydney water damage repairs fall into these bands:
| What we’re putting right | Typical Sydney range |
|---|---|
| A single stain or small ceiling / wall patch — dried, re-set and repainted | $600 – $1,800 |
| One room — ceiling section replaced, structural drying, mould treated, repainted | $1,800 – $5,000 |
| Multiple rooms or heavy saturation — flooring, extensive plaster and mould remediation (often insurance work) | $5,000 – $20,000+ |
Ranges are indicative only and are not a quote. Your figure depends on the factors below — you get an itemised price after a free site visit.
What moves the price
- How saturated the area is and how long the water has been sitting
- Whether plaster, structural timber or subfloor has to be replaced rather than dried
- Mould — how much has grown and whether remediation is needed
- Drying time and the equipment left on site (air movers, dehumidifiers)
- Whether it’s an insurance claim and needs documented moisture reports
The questions we get asked most
“Is this covered by insurance?”
Sudden events — a burst pipe or storm leak — are usually covered; gradual leaks often are not. We document moisture readings and photos so you have what an insurer needs, and we can work directly with your assessor.
“How long will it take?”
Drying alone typically runs 3–7 days before repairs start — rushing straight to plaster over damp material is exactly why damage comes back. We give you a realistic timeline up front, not an optimistic one.
“Do I have to move out?”
Usually no. For a single room we contain the work and you stay in the rest of the home. Only major multi-room saturation occasionally needs you offsite, and we tell you that at the assessment, not halfway through.
“Can you find where it’s coming from?”
Yes — we trace the source before we repair anything. Fixing the ceiling without stopping the leak just buys you a few weeks, so source-first is non-negotiable on every job.
No mystery, no surprises
The same five steps on every water damage job, so you always know what’s happening and why.
Assess & read the moisture
We inspect the affected area, take moisture readings and trace the source — so the quote is based on facts, not a glance.
Stop the source & extract
The leak is stopped and standing water removed before anything else, so the damage stops spreading.
Controlled drying
Air movers and dehumidifiers run until readings confirm the structure is genuinely dry — not just dry to the touch.
Repair & restore
Plaster, cornices, flooring and paint are rebuilt and refinished to match the rest of the room.
Mould check & clean handover
A final mould and moisture check, a clean site, and photos for your records or insurer.
Frequently asked questions
Do you handle water damage insurance claims?
Yes. We document moisture readings, cause and scope with photos, provide itemised reports, and can liaise directly with your insurer or assessor throughout the repair.
How quickly can you get to a water leak?
For active leaks we prioritise a same-day or next-day assessment across Sydney to stop the source and start extraction — the faster water is removed, the less it costs to repair.
Will the mould come back after repairs?
Not if the structure is dried properly first. We only close up and repaint once moisture readings confirm the area is dry, and we treat any existing mould before rebuilding.
Can you match the existing ceiling and paint?
Yes. We re-set cornices and plaster and colour-match the paint so the repaired area blends with the rest of the room rather than standing out as a patch.
How much does water damage repair cost?
A small dried-and-repainted patch is typically $600–$1,800, a full single room $1,800–$5,000, and major multi-room or insurance restorations $5,000–$20,000+. You get an itemised quote after a free site visit.
Get your water damage looked at
Tell us what happened and where. We’ll arrange an assessment, read the moisture and give you a clear itemised quote — no obligation.
Prefer to talk? Call 0452 530 716 — we answer during business hours.
